How to Reset Your Bluetooth Headphones [Ultimate Guide 2024]

Whether you’re experiencing connectivity problems, battery life inconsistencies, or compromised audio quality from your prized Bluetooth headphones, a factory reset may be the simplest yet most effective remedy. This comprehensive guide targets every major brand and empowers users with step-by-step instructions on how to give their headphones a fresh start.

In an increasingly wireless world, Bluetooth headphones have become indispensable for music enthusiasts, professionals, and casual users alike. However, like all tech gadgets, they’re not immune to occasional hiccups. Resetting your Bluetooth headphones can often iron out these issues swiftly, restoring your listening experience to its pristine state.

How to Reset Bluetooth Headphones: A General Guide

Before we deep-dive into brand-specific instructions, it’s essential to understand the general process of resetting Bluetooth headphones:

1. Power off the headphones.
2. If applicable, unpair the headphones from your device by forgetting them in the Bluetooth settings section.
3. Press and hold the power button or the combination of buttons your headphones’ manufacturer recommends for a duration—typically between 5 to 20 seconds.
4. Release the buttons when you notice an indicator light flashing or an audible sound that signifies the reset.
5. Power the headphones back on and pair them with your device once more.

This series of actions generally applies to most Bluetooth headphones, with some variation across brands and models. A successful reset is often indicated by a specific light sequence or sound cue, so consult your product manual for precise details.

How to Reset Bluetooth Headphones According to Brand

Different headphone brands have various reset procedures tailored to their unique designs. Below, you’ll find a rundown of steps for a wide array of popular brands. Please refer to the manufacturer’s official support pages for further assistance and information. 

How to Reset AirPods

Apple’s immensely popular true wireless earphones, the AirPods, are reset as follows:

1. Place them in their case.
2. Close the lid.
3. Wait 30 seconds.
4. Open the lid.
5. Press and hold the setup button on the back of the case for 15-20 seconds until the status light blinks amber, then white.
6. Release the button.
7. Pair with your device again.

How to Reset Anker Headphones

Anker Soundcore Life headphones can be reset by following these steps:

1. With your headphones on, press and hold the power button for 7 seconds until the LED flashes blue twice.
2. Release the button.
3. Turn off the headphones and turn them back on.

How to Reset JBL Headphones

JBL Bluetooth headphones are reset differently across different models. Here are the steps for two popular options:

1. For JBL Live 650BTNC: Turn off your headphones, then press and hold the power button for 10 seconds until you hear “Welcome to JBL.”
2. For JBL Free X or Tune 120TWS: With your earbuds in the case, open the lid and press both earbuds for 10 seconds until you see a white light flashing.

How to Reset Plantronics Headphones

Plantronics headphones are typically reset as follows:

1. With your headphones powered off, press and hold the power/pairing button for 5-6 seconds until you hear “Pairing.”
2. Release the button.
3. Power off your headphones again.
4. Power them back on and connect to your device.

How to Reset Samsung Galaxy Buds

Samsung Galaxy Buds can be reset by doing the following:

1. Open the case with your earbuds inside and leave it open.
2. Press and hold both earbuds for 7 seconds until you see a red light flashing.
3. Release the buttons and then press them again for 1 second to turn the earbuds off.
4. Turn them back on and pair them with your device.

How to Reset Sony Headphones

Sony headphones have various reset procedures depending on the model. Here are instructions for two popular options:

1. For WH-1000XM4: With your headphones on, press and hold the power button for 7 seconds until you hear a voice guidance prompt.
2. For WF-SP800N: Power off your earbuds and then press and hold both touchpads for around 10 seconds until they turn off again.

How to Reset Audio Technica Headphones

Audio Technica headphones can be reset by performing the following actions:

1. Turn off your headphones.
2. Press and hold the left earcup button for 10 seconds.
3. Release the button when you hear an audible cue.
4. Power them back on and complete pairing with your device once more.

How to Reset Beats Headphones 

Beats headphones can be reset following these steps:

1. Connect your headphones to a power source.
2. Hold down both the power button and the volume down button for 10 seconds.
3. Release the buttons when you see a white light flashing or hear an audible cue.
4. Power them back on and connect to your device again.

How to Reset Bose Headphones

Bose headphones have various reset procedures depending on the model. Here’s how to reset the popular QC35 II:

1. Turn off your headphones.
2. Press and hold the power button for 15 seconds until you hear “Bluetooth device list cleared” or see all lights flash.
3. Release the button.
4. Remove your device from the Bluetooth settings and pair again.

How to Reset Sennheiser Headphones

Sennheiser Bluetooth headphones are reset as follows:

1. Turn off your headphones.
2. Press and hold the power button for 7 seconds until you see a white light flashing three times.
3. Release the button.
4. Turn them back on and pair them with your device again.

How to Reset Jabra Headphones

Jabra headphones can be reset by following these steps:

1. Turn off your headphones.
2. Press and hold the power button for 10 seconds until you see a purple light flashing.
3. Release the button.
4. Turn them back on and pair them with your device once more.

When Should You Reset Your Bluetooth Headphones?

Consider a reset when you face persistent pairing problems, unexpected functionality issues, or erratic behaviors from your headphones that conventional troubleshooting doesn’t resolve. It’s also a great idea to reset your headphones if you’re planning to sell or pass them on to someone else.

Remember, resetting should be the last resort after trying all other basic troubleshooting techniques. If a reset does not fix the problem, it’s advisable to reach out to the manufacturer for support. With proper care and maintenance, your Bluetooth headphones should provide you with top-notch audio quality and hassle-free use for years to come. So, keep this guide handy, and happy listening!  

What if the Reset Doesn’t Work?

If a reset fails to solve your headphone’s issues, it could be due to hardware malfunction or deeper software problems. Contact the manufacturer for assistance or consider professional repair services. It’s also a good idea to check for any available firmware updates that may address known issues.

Additionally, suppose your headphones are still under warranty. In that case, you may be able to get a replacement or free repair from the manufacturer. Be sure to have your proof of purchase and warranty information on hand when reaching out for support. Overall, following the proper reset procedures and taking good care of your headphones can help maximize their lifespan and ensure a great listening experience. So don’t hesitate to take that extra step and give your Bluetooth headphones a reset when needed. Happy listening! 

Additional Tips for Maintaining Your Bluetooth Headphones

• Keep them clean: Wipe down your headphones regularly with a soft, dry cloth to remove any dirt or debris. 
• Store them properly: When not in use, store your headphones in a clean and dry place to avoid damage.
• Avoid extreme temperatures: Try not to expose your headphones to extreme heat or cold, as it can damage the internal components.
• Protect from moisture: Keep your headphones away from water and moisture sources, including sweat, rain, and humidity.
• Use the provided case: If your headphones come with a case, use it for extra protection when storing or traveling.
• Handle with care: Avoid dropping or mishandling your headphones to prevent any physical damage. 

By following these tips and regularly resetting your Bluetooth headphones as needed, you can ensure optimal performance and longevity from your device.

FAQs

Q1. Will resetting my Bluetooth headphones erase any data?

Resetting your headphones will generally erase all pairing and settings data, returning the device to factory condition.

Q2. How do I know if my headphones are successfully reset?

A successful reset is usually indicated by a specific light sequence, a sound cue, or a service voice prompt.

Q3. Is it safe to reset my headphones regularly?

Yes, it’s safe, but generally, it’s only necessary if you encounter issues that require it. 

Q4. Can I reset my headphones while they are connected to a device?

It is recommended that you disconnect your headphones from all devices before resetting them.

Q5. How often should I reset my Bluetooth headphones?

Only perform a reset when necessary, following the manufacturer’s instructions for your specific model. Overall, it’s best to avoid resetting your headphones unnecessarily, as it can affect their performance and possibly void the warranty. Happy listening! 

Conclusion